BARNEY’S FARM SALE – UNLIMITED BUY 1, GET 1 – CHOOSE FROM 5 TOP STRAINS AT CHECKOUT
⬤
BARNEY’S FARM SALE – UNLIMITED BUY 1, GET 1 – CHOOSE FROM 5 TOP STRAINS AT CHECKOUT
⬤
BARNEY’S FARM SALE – UNLIMITED BUY 1, GET 1 – CHOOSE FROM 5 TOP STRAINS AT CHECKOUT
⬤
BARNEY’S FARM SALE – UNLIMITED BUY 1, GET 1 – CHOOSE FROM 5 TOP STRAINS AT CHECKOUT
⬤
BARNEY’S FARM SALE – UNLIMITED BUY 1, GET 1 – CHOOSE FROM 5 TOP STRAINS AT CHECKOUT
⬤
BARNEY’S FARM SALE – UNLIMITED BUY 1, GET 1 – CHOOSE FROM 5 TOP STRAINS AT CHECKOUT
⬤
Lemon Haze Auto
Autoflower Seeds
Various Quantities
Price range: $12.00 through $150.00
Lemon Haze Auto by Barney’s Farm — autoflowering feminized seeds. Have you been on the hunt for a truly exceptional strain that will leave you feeling rejuvenated and invigorated? Look no further, we have just the thing – Lemon Haze Auto. Up to 24% THC.
Lemon Haze Auto by Barney’s Farm is an autoflowering feminized strain bred from Lemon Haze Strain x BF Super Auto #1. It tests at up to 24% THC with a 70% sativa / 30% indica profile. Have you been on the hunt for a truly exceptional strain that will leave you feeling rejuvenated and invigorated? Look no further, we have just the thing – Lemon Haze Auto.
Lemon Haze Auto grows to 90-110 cm indoors and 100-120 cm outdoors. As an autoflower it finishes in about 65-70 days from seed, with no light-cycle change needed. Indoor yields reach around 450-550 g/m², and outdoor plants can produce up to 180-250 g/plant.
Lemon Haze Auto – FAQ – Frequently Asked Questions
Lemon Haze Auto by Barney’s Farm is 70% Sativa and 30% Indica.
Lemon Haze Auto by Barney’s Farm tests at up to 24% THC.
Lemon Haze Auto is a cross of Lemon Haze Strain x BF Super Auto #1.
Indoors, Lemon Haze Auto grows to 90-110 cm. Outdoors, plants can reach 100-120 cm.
Indoors, Lemon Haze Auto yields up to 450-550 g/m². Outdoors, plants can produce up to 180-250 g/plant.
Lemon Haze Auto is an autoflowering strain and takes approximately 65-70 days from seed to harvest under suitable growing conditions.
An 18/6 light schedule (18 hours on, 6 hours off) is commonly used for autoflowering strains like Lemon Haze Auto for the whole grow.
Store Lemon Haze Auto seeds in a cool, dark place in an airtight container, ideally in a refrigerator. Avoid freezing and make sure they are properly labeled and dated.
Germinate at 70-90 degrees F (21-32 degrees C). Below 70F can delay or stop germination; above 90F can cause poor germination and increase the risk of seedlings drying out.
If allowed in your location, we recommend the paper towel method: place seeds between damp paper towels, keep them warm and dark, and check daily to ensure the paper towel stays moist.
Once germinated, transfer to soil or similar grow media, making a small hole 5-10 mm deep. Gently place the sprouted seed root-down in the hole. Use a match or toothpick rather than handling with your fingers.
No. Start in smaller pots and gradually move to larger containers as the root structure develops. Smaller pots dry out more quickly, which encourages roots to spread in search of moisture and nutrients. Incrementally increasing pot size stimulates new root growth and allows for more precise watering and feeding.
Seed Germination Instructions
for cannabis seeds
Step 1: Soak the seeds
- Fill a glass with clean, room-temperature water (68-77°F / 20-25°C).
- Use filtered, dechlorinated, or pH-balanced water to prevent contaminants.
- Drop the seeds into the water and gently swirl to ensure full submersion.
- If seeds float, tap them down lightly or leave them to absorb water.
- Optional: Add 3% hydrogen peroxide (H₂O₂) at a ratio of 1 ml per 100 ml of water to prevent mold and bacteria.
- Place the glass in a dark, warm location for 2-6 hours (do not exceed 12 hours to prevent drowning).
Step 2: Prepare the Germination Plate
- Dampen two layers of paper towel, cotton, or thick toilet paper with clean, dechlorinated water.
- If using toilet paper, fold multiple plies to ensure adequate thickness.
- Place seeds evenly between the layers, ensuring they do not touch each other.
- Towels should be moist but not soaking wet.
- Set the damp towel on a plate and cover with another plate or place it inside a resealable plastic bag to retain moisture.
- Store in a dark, warm location (70-78°F / 21-26°C) such as a drawer or cabinet.
- Check the moisture level every 6-12 hours and add water as needed to prevent drying.
- Expected Germination Time:
- Most seeds crack open within 48-72 hours.
- Some may take 5-6 days to show taproots.
- Older seeds or seeds with a tougher shell may take up to 10-15 days to sprout.
- If a seed has not sprouted within 10 days, gently check it for signs of swelling or softening.
Step 3: Monitor Germination
- Seeds typically crack open and develop a taproot within 48-72 hours, but some may take up to 5-6 days.
- Older or dormant seeds may take 10-15 days to sprout, especially if they have a thicker shell.
- Check regularly for signs of mold or fungal growth.
- If mold appears, replace the paper towel and rinse seeds in a diluted hydrogen peroxide solution (1 ml of 3% H₂O₂ per 100 ml water).
- The seed is ready for planting when the white taproot emerges and reaches ¼-½ inch (0.6-1.3 cm).
Step 4: Planting the Seeds
- Prepare a pH-balanced growing medium (pH 5.5-6.0) such as:
- Quality soil-perlite mix
- Coco coir with perlite
- Rockwool cubes (must be pre-soaked in pH 5.5 water)
- Plant the seed 2-5 mm deep, with the root tip facing downward.
- Use containers that are at least 10 cm (4 inches) deep with drainage holes for healthy root development.
- Lightly cover the seed with soil—do not press down too hard.
- Spray the top layer with water instead of drenching it.
Step 5: Initial Care for Seedlings
- Keep the growing medium moist but not waterlogged—spray with a spray bottle instead of overwatering.
- Maintain high humidity by:
- Covering containers with clear plastic wrap or a humidity dome.
- Ensuring there is some airflow to prevent mold buildup.
- Place seedlings under cold white LED or fluorescent lights or in indirect sunlight at 68-77°F (20-25°C).
Step 6: Gradual Exposure to Light
- Once seedlings emerge and develop their first set of leaves (cotyledons):
- Slowly introduce them to stronger light sources.
- Start with low-intensity LED, CFL, or indirect sunlight, then gradually increase exposure.
- Keep grow lights at a safe distance:
- LEDs: 12-24 inches (30-60 cm) above seedlings.
- HPS/MH: 24-36 inches (60-90 cm) above seedlings.
- If transitioning to outdoor sunlight:
- Harden seedlings off gradually by placing them outside for short periods each day.
Additional Tips
- Use filtered rainwater, bottled water, or dechlorinated tap water.
- Maintain humidity levels between 70-80% for optimal germination.
- Avoid handling the taproot directly, as it is delicate and can be easily damaged.
- If using rockwool cubes, pre-soak them in pH 5.5 water before planting.
- Germination rates depend on strain genetics, seed age, and storage conditions.
Seeds may take longer to sprout if conditions are too dry, cold, or hot.
Failure to follow these steps may reduce germination success and replacements are unlikely.
By following these steps, you’ll achieve healthy, vigorous cannabis seedlings ready for strong growth. 🌱
